Turning holder MCLNR 2020 K12 for external turning.
Suitable for inserts CN_ _12_ _.
M - Method of clamping insert in to holder, with a clamp from above, and with screw through insert
C - Shape of turning insert which can be clamped into holder (RHOMBIC 80°)
L - Angle under which the insert is attached to the holder (95°) relative to the workpiece axis
N - Clearance angle of insert for this holder (0°)
R - Orientation of turnig tool is right
20 - Height of turning tool in mm
20 - Width of turning tool in mm
K - Length of turning tool is 125mm
12 - Insert size which can be clamped in to holder
- Hardened steel - 42-45 HRc
Compatible with inserts. . . CN_ _12_ _.