Turning holder MDJNR 1616 H11 for external turning.
Suitable for turning inserts DN_ _11_ _.
M - Method of clamping insert in to holder, with a clamp from above, and with screw through insert
D - Shape of turning insert which can be clamped into holder (RHOMBIC 55°)
J - Angle under which the insert is attached to the holder (93°) relative to the workpiece axis
N – Clearance angle of insert for this holder (0°)
R – Orientation of turnig tool is right
16 – Height of turning tool in mm
16 – Width of turning tool in mm
H - Length of turning tool is 100mm
11 – Insert size which can be clamped in to holder
- Hardened steel - 42-45 HRc
with inserts . . . DN_ _11_ _.